Slide Mounting Media
Vector Laboratories VECTASHIELD Vibrance Antifade Mounting Medium 10 ml
VECTASHIELD Vibrance Antifade Mounting Medium offers superior protection against photobleaching during fluorescence-based imaging of cells and tissue sections. It is supplied as an aqueous, ready-to-use formulation, no sealing is required, and sections may be viewed after only one hour. There is minimal bubble formation, retraction or background development over extended room temperature slide storage. It works well with dyes and other fluors across the spectrum, including those with far-red fluorescence. The refractive index after curing is 1.47. 12-month expiration.
Vector Laboratories VECTASHIELD Vibrance Antifade Mounting Medium with DAPI 10 ml
VECTASHIELD Vibrance Antifade Mounting Medium with DAPI offers superior protection against photobleaching during fluorescence-based imaging of cells and tissue sections. It is supplied as an aqueous, ready-to-use formulation with a blue fluorescent counterstain. No sealing is required, and sections may be viewed after only one hour. There is minimal bubble formation, retraction or background development over extended room temperature slide storage. It works well with dyes and other fluors across the spectrum, including those with far-red fluorescence. The refractive index after curing is 1.47. 12-month expiration.
Vector Laboratories VECTASHIELD HardSet™ Antifade Mounting Medium 10 ml
VECTASHIELD®HardSet™ Mounting Medium prevents rapid photobleaching of fluorescent proteins and dyes. After approximately 15 minutes at room temperature, the coverslip will become immobilized, and optimal antifade ability and refractive index of 1.46 will be achieved. Mounted slides should be stored at 4 degrees C, protected from light. An attractive alternative to VECTASHIELD HardSet Mounting Medium is VECTASHIELD®Vibrance™ (NC1551231), which has improved antifade and handling characteristics. VECTASHIELD HardSet Mounting Medium is compatible with a wide array of fluorochromes, enzymatic substrates, and fluorescent proteins. The refractive index is 1.45.
Vector Laboratories VECTASHIELD PLUS Antifade Mounting Medium, 10ml
VECTASHIELD PLUS protects against fading across the visible spectrum, even under far-red wavelengths. It is compatible with most commercially available fluorophores. This new formulation of non-setting media improves upon the original VECTASHIELD products. Specifically, VECTASHIELD PLUS exhibits no inherent background or toning and provides superior fluorophore signal retention across the spectrum, including far-red wavelengths.Features:No inherent toning or backgroundSuperior signal retention across the spectrum from blue to far redMounted sections can be viewed in 1 hourAvailable in two convenient sizesSuperior non-setting formulation
Vector Laboratories VectaMount™ AQ Mounting Medium 60 ml
VectaMount™ AQ Mounting Medium is a hardsetting mounting medium developed for use with enzymatic substrates, such as AEC, ImmPACT™ AEC, and ImmPACT™ AMEC Red, whose reaction products are soluble in alcohol or other organic solvents. In applications where aqueous mounting is preferred, VectaMount™ AQ is suitable for use with other substrates such as DAB, Vector SG, BCIP/NBT, Vector Red, ImmPACT™ Vector Red, Vector Blue, ImmPACT™ DAB, ImmPACT™ DAB EqV, and ImmPACT™ SG. VectaMount™ AQ is simple to use, requires no mixing, and preserves the color and clarity of the substrates. Stained sections mounted with VectaMount™ AQ can be stored in a slide box at room temperature for at least 2 years without fading.
![Buehler EpoxiCure 2 Resin, 64oz [1.9L]](https://assets.fishersci.com/TFS-Assets/CCG/product-images/OS-0011459EPOXICURE-2-RESIN-64OZ19L.JPEG-250.jpg)
Buehler EpoxiCure 2 Resin, 64oz [1.9L]
This item has a minimum qty of 2 per supplier requirements.
EpoxiCure 2 is a clear general purpose epoxy system with a 6 hr cure time. 64 oz
Vector Laboratories VectaMount Express Mounting Medium, 60 ml
VectaMount Express is a non-aqueous clearing and mounting medium enabling the rapid mounting of cell and tissue specimens following immunohistochemistry (IHC) staining. This novel formulation is engineered to enable mounting directly following staining, saving time by eliminating the need for extensive ethanol and clearing washes prior to coverslipping. Just stain your slides as per your usual workflow, briefly wash in isopropyl alcohol, and coverslip. Features: Non-aqueous clearing and mounting medium for IHC-stained slides. Eliminates the need for extensive ethanol washes and solvent-based clearing agents (e.g., xylene).Rapid drying formula for fast visualization of stained samples. Preserves staining for at least 18 months at room temperature.
Leica Biosystems SPECTRA CV X1 MOUNTING MEDIUM
HistoCore SPECTRA CV X1 is a rapid drying, xylene based mounting media. An antioxidant is added to inhibit stain fading and prevent the formation of annual rings. It sets up quickly, allowing slide preparations to be handled immediately after mounting. SPECTRA X1 is soluble in xylene, toluene, and most xylene substitutes.This product is only available for use in conjunction with the HistoCore SPECTRA CV.
Andwin Scientific MOUNTING MEDIA 16OZ
The Tissue-Tek Glas Mounting Medium is compatible to use with the Glas Coverslipper to maximize performance, generating clean, bubble-free slides. This product can be opened and put directly onto the mounting medium area of the coverslipper without the need of pouring.
Newcomer Supply Chrome Alum-Gelatin Adhesive, 250 ml
For water bath use to add extra adhesion of the tissue section to the glass slide. Newcomer Supply Chrome Alum-Gelatin Adhesive provides a blended solution of chrome alum and high-quality gelatin that promotes a strong adhesive bond between tissue sections and microscopic slides. Chrome Alum-Gelatin Adhesive can be used as an additive to water baths or as subbed slide/direct slide coating application to prevent or reduce the loss of tissue sections due to the nature of the tissue, section thickness or harsh staining treatments, while leaving minimal or no background staining. Shelf Life is 1 year from date of manufacture. Store at 15-30°C.
Diagnostic Biosystems CC/MOUNT CC/Mount™
CC/Mount is an aqueous mounting medium with very high refractive index. When applied to the stained tissue sections, specimens can be permanently mounted without chromogens fading. Due to the superior refractive index of CC/Mount, tissues mounted in this medium look like dehydrated specimens. No coverslipping is required with CC/Mount. However, if coverslipping is desired, dried CC/Mount can be post-mounted by using an organic based mounting medium. Advantages of CC/Mount are numerous: no coverslip, no exposure to the organic fumes, permanent storage of slides and high resolution of tissue specimens. CC/Mount is compatible with chromogens lik AEC, DAB, Fast Red, BCIP/NBT, BCIP/INT and fluorescent dyes like FITC and phycobiliproteins. The high pH of CC/Mount ensures increased stability of fluorescence.\n\nThis product is designed for permanent mounting of tissue specimens stained with peroxidase and alkaline phosphatase-based systems and various fluorescent dyes.
Polysciences, Inc. Aqua-Poly/Mount, 5 x 20 mL
Aqua-Poly/Mount is a water-soluble, non-fluorescing, non-permanent, aqueous mounting medium formulated for mounting sections directly from aqueous solutions. It is useful for immunofluorescent techniques as it enhances and retains fluorescent stains.
Vector Laboratories VECTASHIELD Vibrance Antifade Mounting Medium with DAPI 2 ml
VECTASHIELD Vibrance Antifade Mounting Medium with DAPI offers superior protection against photobleaching during fluorescence-based imaging of cells and tissue sections. It is supplied as an aqueous, ready-to-use formulation with a blue fluorescent counterstain. No sealing is required, and sections may be viewed after only one hour. There is minimal bubble formation, retraction or background development over extended room temperature slide storage. It works well with dyes and other fluors across the spectrum, including those with far-red fluorescence. The refractive index after curing is 1.47. 12-month expiration.